Zirconite ZC Boosta NANO Ceramic Coating 30 ml

Nano Coating Ceramic Booster

The ZC Boosta is a ceramic coating that provides a much needed boosted layer of protection for your vehicle's ceramic coating or previous coatings. This unique booster coating chemically fuses to increase the durability and longevity of the hydrophobic properties of Zirconite coatings. Provides additional protection against the elements such as water, dirt, etc. This coating is also great in boosting protection from various scratches and abrasions, as well as, added resistance to chemicals and corrosion! This booster coating provides a permanent bond to all surfaces it is applied to and has a Super-Hydrophobic effect, making any water that encounters the surface immediately bead right off ensuring your surface stays cleaner for longer. This booster makes any coating extremely long lasting, one coat provides years of additional protection for your vehicle. Works best with Zirconite Quartz Ceramic Coating.

ZC-Boosta can also be used as a stand-alone coating

Directions for Application:

1. To ensure optimum bonding of the ZC Boosta Coating to the paint surface, use paint correction if required, must be carried out to remove any scratch, swirl or hologram issue prior to application of the Coating.
3. Using an applicator with a suede cloth discharge a line of ZC Boosta around the face of the cloth.
4. Apply the product to the working surface using the applicator and cloth combo. Working surface should be no greater than 50cm x 50cm. Apply the product in a crosshatch motion.
5. After applying allow the working surface 5 minutes for the product to flash off, Climate dependent.
6. After flash-off buff remaining residue off with the second suede cloth to a high gloss finish.
7. Repeat Steps 4-6 with the rest of the car. If applying second coat, please wait at least 4 hours.